Patching

Drywall Patching in Lincoln, NE

Holes in drywall patched and finished flat: doorknob holes, anchor and screw holes, TV-mount holes and openings cut for plumbing or wiring.

Get a free patching estimate (531) 331-4700
A square drywall patch taped and coated where a doorknob went through the wall behind a door, with a mud pan and putty knife below

What drywall patching looks like with us

Patching is for a hole: something went through the wall, or someone cut into it. Nail, screw and wall-anchor holes are filled and finished flush. Bigger damage, like a doorknob that went through, a hole from a fall or a moving dolly, or a square cut out to reach a pipe or a wire, gets a new piece of drywall fitted into the opening, then taped and finished so the wall reads as one flat surface again.

What’s included

Nail, screw and wall-anchor holes
Doorknob holes and impact damage
Openings cut for plumbing, wiring or a removed fixture

Small holes and big holes are different jobs

Nail holes and small anchor holes only need filling and sanding. Once a hole is more than a couple of inches across, filler on its own tends to sink, crack or fall out, because there is nothing behind it to hold onto. That is why a larger hole is cut back and patched with a new piece of drywall instead.

How a larger hole gets patched

The standard method, step by step:

  • Cut back. Crushed or loose board around the hole is cut back to solid drywall, usually to a clean square.
  • Back it. A bigger opening gets backing behind it, so the new piece has something solid to fasten to.
  • Fit a new piece. Drywall of the same thickness is cut to fit the opening and fastened in.
  • Tape and coat. The seams are taped, then covered with thin coats of joint compound, each one wider than the last.
  • Sand and check. Once dry, the patch is sanded smooth and checked with a light held low across the wall.

Helpful to mention when you ask

A few details make the estimate quicker and more accurate:

  • Roughly how big each hole is, or how many small ones there are.
  • Whether the wall is smooth or has a texture, such as orange peel or knockdown.
  • What caused it, if it was anything other than a knock: a leak, a pipe or wiring work.
  • Whether you have the paint color on hand, if you know it.

Patching and painting

A patch that has been sanded smooth still looks different from the wall around it until it is primed and painted, because joint compound takes paint differently from the wall's old finish. Whether priming and painting the patched area are part of your job is something to settle at the estimate, so you know exactly what you are getting.

Where we work

Drywall Patching across Lincoln and about 60 miles around it — Omaha, Bellevue, Papillion and La Vista, Fremont, Seward, Crete, Beatrice and the towns in between. Check your town.

Ready to price your drywall patching?

Tell us about the damage and our office will set up a free estimate anywhere in the service area.

Free estimates

Call Now for an Estimate